Description

1 Part 1: Q-Learning
1.1 Introduction
Part 1 of this assignment requires you to implement and evaluate Q-learning with convolutional neural networks for playing Atari games. The Q-learning algorithm was covered in lecture, and you will be provided with starter code. This assignment will be faster to run on a GPU, though it is possible to complete on a CPU as well. We recommend using the Colab option if you do not have a GPU available to you. Please start early!
1.2 File overview
The starter code for this assignment can be found at
https://github.com/berkeleydeeprlcourse/homework_fall2020/tree/master/hw3
We will be building on the code that we have implemented in the first two assignments. All files needed to run your code are in the hw3 folder, but there will be some blanks you will fill with your solutions from homework 1. These locations are marked with # TODO: get this from hw1 or hw2 and are found in the following files:
• infrastructure/rl trainer.py
• infrastructure/utils.py
• policies/MLP policy.py
In order to implement deep Q-learning, you will be writing new code in the following files:
• agents/dqn agent.py
• critics/dqn critic.py
• policies/argmax policy.py
There are two new package requirements (opencv-python and gym[atari]) beyond what was used in the first two assignments; make sure to install these with pip install -r requirements.txt if you are running the assignment locally.
1.3 Implementation
We recommend using LunarLander-v3 to check the correctness of your code before running longer experiments with MsPacman-v0.
1.4 Evaluation
Once you have a working implementation of Q-learning, you should prepare a report. The report should consist of one figure for each question below. You should turn in the report as one PDF and a zip file with your code. If your code requires special instructions or dependencies to run, please include these in a file called README inside the zip file.
Question 1: basic Q-learning performance. (DQN) Include a learning curve plot showing the performance of your implementation on Ms. Pac-Man. The x-axis should correspond to number of time steps (consider using scientific notation) and the y-axis should show the average per-epoch reward as well as the best mean reward so far. These quantities are already computed and printed in the starter code. They are also logged to the data folder, and can be visualized using Tensorboard as in previous assignments. Be sure to label the y-axis, since we need to verify that your implementation achieves similar reward as ours. You should not need to modify the default hyperparameters in order to obtain good performance, but if you modify any of the parameters, list them in the caption of the figure. The final results should use the following experiment name:
python cs285/scripts/run_hw3_dqn.py –env_name MsPacman-v0 –exp_name q1
python cs285/scripts/run_hw3_dqn.py –env_name LunarLander-v3 –exp_name q2_dqn_1 –seed 1 python cs285/scripts/run_hw3_dqn.py –env_name LunarLander-v3 –exp_name q2_dqn_2 –seed 2 python cs285/scripts/run_hw3_dqn.py –env_name LunarLander-v3 –exp_name q2_dqn_3 –seed 3
python cs285/scripts/run_hw3_dqn.py –env_name LunarLander-v3 –exp_name q2_doubledqn_1 -double_q –seed 1 python cs285/scripts/run_hw3_dqn.py –env_name LunarLander-v3 –exp_name q2_doubledqn_2 -double_q –seed 2 python cs285/scripts/run_hw3_dqn.py –env_name LunarLander-v3 –exp_name q2_doubledqn_3 -double_q –seed 3
Submit the run logs (in cs285/data) for all of the experiments above. In your report, make a single graph that averages the performance across three runs for both DQN and double DQN. See scripts/read results.py for an example of how to read the evaluation returns from Tensorboard logs.
python run_hw3_dqn.py –env_name LunarLander-v3 –exp_name q3_hparam1
python run_hw3_dqn.py –env_name LunarLander-v3 –exp_name q3_hparam2
python run_hw3_dqn.py –env_name LunarLander-v3 –exp_name q3_hparam3
You can replace LunarLander-v3 with PongNoFrameskip-v4 or MsPacman-v0 if you would like to test on a different environment.
2 Part 2: Actor-Critic
2.1 Introduction
Recall the policy gradient from hw2:
.
In this formulation, we estimate the Q function by taking the sum of rewards to go over each trajectory, and we bustract the value function baseline to obtain the advantage

In practice, the estimated advantage value suffers from high variance. Actor-critic addresses this issue by using a critic network to estimate the sum of rewards to go. The most common type of critic network used is a value function, in which case our estimated advantage becomes

In this assignment we will use the same value function network from hw2 as the basis for our critic network. One additional consideration in actor-critic is updating the critic network itself. While we can use Monte Carlo rollouts to estimate the sum of rewards to go for updating the value function network, in practice we fit our value function to the following target values:
yt = r(st,at) + γV π(st+1)
we then regress onto these target values via the following regression objective which we can optimize with gradient descent:
minX(Vφπ(sit) − yit)2
φ
i,t
1. Update targets with current value function
2. Regress onto targets to update value function by taking a few gradient steps
3. Redo steps 1 and 2 several times
In all, the process of fitting the value function critic is an iterative process in which we go back and forth between computing target values and updating the value function to match the target values. Through experimentation, you will see that this iterative process is crucial for training the critic network.
2.2 Implementation
Your code will build off your solutions from homework 2. You will need to fill in the TODOS for the following parts of the code. To run the code, go into the hw3 directory and simply execute python cs285/scripts/run_hw3_actor_criti
• In policies/MLP_policy.py copy over your policy class for PG, you should note that the AC policy class is in fact the same as the policy class you implemented in the policy gradient homework (except we no longer have a nn baseline).
• In agents/ac_agent.py, finish the train function. This function should implement the necessary critic updates, estimate the advantage, and then update the policy. Log the final losses at the end so you can monitor it during training.
• In agents/ac_agent.py, finish the estimate_advantage function: this function uses the critic network to estimate the advantage values. The advantage values are computed according to

Note: for terminal timesteps, you must make sure to cut off the reward to go (i.e., set it to zero), in which case we have

• critics/bootstrapped_continuous_critic.py complete the TODOS in update. In update, perform the critic update according to process outlined in the introduction. You must perform self.num_grad_steps_per_target_update * self.num_target_updates number of updates, and recompute the target values every self.num_grad_steps_per_target_update number of steps.
2.3 Evaluation
Once you have a working implementation of actor-critic, you should prepare a report. The report should consist of figures for the question below. You should turn in the report as one PDF (same PDF as part 1) and a zip file with your code (same zip file as part 1). If your code requires special instructions or dependencies to run, please include these in a file called README inside the zip file.
Question 4: Sanity check with Cartpole Now that you have implemented actor-critic, check that your solution works by running Cartpole-v0.
python run_hw3_actor_critic.py –env_name CartPole-v0 -n 100 -b 1000 –exp_name q4_ac_1_1
-ntu 1 -ngsptu 1
In the example above, we alternate between performing one target update and one gradient update step for the critic. As you will see, this probably doesn’t work, and you need to increase both the number of target updates and number of gradient updates. Compare the results for the following settings and report which worked best. Do this by plotting all the runs on a single plot and writing your takeaway in the caption.
python run_hw3_actor_critic.py –env_name CartPole-v0 -n 100 -b 1000 –exp_name q4_100_1 ntu 100 -ngsptu 1
python run_hw3_actor_critic.py –env_name CartPole-v0 -n 100 -b 1000 –exp_name q4_1_100 ntu 1 -ngsptu 100
python run_hw3_actor_critic.py –env_name CartPole-v0 -n 100 -b 1000 –exp_name q4_10_10 ntu 10 -ngsptu 10
At the end, the best setting from above should match the policy gradient results from Cartpole in hw2 (200).
Question 5: Run actor-critic with more difficult tasks Use the best setting from the previous question to run InvertedPendulum and HalfCheetah:
python run_hw3_actor_critic.py –env_name InvertedPendulum-v2 –ep_len 1000 –discount
0.95 -n 100 -l 2 -s 64 -b 5000 -lr 0.01 –exp_name q5_<ntu>_<ngsptu> -ntu <> -ngsptu <>
where <ntu> <ngsptu> is replaced with the parameters you chose.
python run_hw3_actor_critic.py –env_name HalfCheetah-v2 –ep_len 150 –discount 0.90 -scalar_log_freq 1 -n 150 -l 2 -s 32 -b 30000 -eb 1500 -lr 0.02 –exp_name q5_<ntu>_< ngsptu> -ntu <> -ngsptu <>
Your results should roughly match those of policy gradient. After 150 iterations, your HalfCheetah return should be around 150. After 100 iterations, your InvertedPendulum return should be around 1000. Your deliverables for this section are plots with the eval returns for both enviornments.
As a debugging tip, the returns should start going up immediately. For example, after 20 iterations, your HalfCheetah return should be above -40 and your InvertedPendulum return should near or above 100. However, there is some variance between runs, so the 150-iteration (for HalfCheetah) and 100-iteration (for InvertedPendulum) results are the numbers we use to grade.
3 Submitting the code and experiment runs
In order to turn in your code and experiment logs, create a folder that contains the following:
• The cs285 folder with all the .py files, with the same names and directory structure as the original homework repository (excluding the data folder). Also include any special instructions we need to run in order to produce each of your figures or tables (e.g. “run python myassignment.py -sec2q1” to generate the result for Section 2 Question 1) in the form of a README file.
As an example, the unzipped version of your submission should result in the following file structure. Make sure that the submit.zip file is below 15MB and that they include the prefix q1 , q2 , q3 , etc. agents
… …
Turn in your assignment on Gradescope. Upload the zip file with your code and log files to HW3 Code, and upload the PDF of your report to HW3.